We found 100332 price guide item(s) matching your search

A Japanese style short sword with scabbard, 20th century, 72cm long

Wooden mosaic patterned table centre plaque, ornamental knife and scabbard set, wooden trinket bowls etc. This bladed product is not for sale to people under the age of 18. By bidding on this item you are declaring that you are 18 years of age or over. Please note that if you require P&P for this lot, this can only be done using an age verified method.

A Kris ceremonial sword and scabbard, the scabbard decorated with elephants, rhinos, and crocodiles, the sword 47cm long, a machete with crop handle, and a wooden monkey skull case, the machete 49cm long, a metal letter opener with prancing horse surmount, 18cm long, and an ebonised page turner, the terminal with four grotesque faces, 35.5cm long (4) Provenance: The Clock House, Dunmow, Essex Condition ReportThe Kris sword overall - 47cm long, the handle 10cm long and the blade 37cm long, scabbard is 47cm long, Rubbing to the blade with some roughness to the edges. Markings to the handles. The scabbard has rubbing to the top and scratching to the metal area.The machete blade -37cm long, the handle 12cm long. The scabbard is 57cm long. Rust to the blade throughout. and heavy rubbing to the handle. Chipping to the scabbard.Letter opener - has rubbing throughout and minor scratches to the blade.The page turner - rubbing to the ebonsied area. The terminal with a slight wobble. Markings and scratches to the faces.

WWI military bayonet, marked 'HF' with the kings crown, patented 'N 2693' and 'K', complete with metal scabbard, blade length 24cm.

INFANTRY OFFICER CORD | FRANCE, FRENCH | Country: France | Date: beginning of the 19th century | Condition: very good | Lot information | Officer's cord of the French infantry, typical of a richly decorated basket with a relief motif of military trophies. The handle is blackened with brass details, the blade is decorated with etched motifs on both sides. A scabbard with brass fittings is included. | Dimensions | Length: 99.8 cm | Blade length: 84.5 cm | Blade width: 20 mm | Weight: 580 g***IMPORTANT NOTICE*** | SHIPPING ONLY WITHIN THE EUROPEAN UNION | Bidders are obliged to inform themselves about the condition of the lots before the auction, subsequent complaints will not be taken into account.

DAGGER | GEORGIA (CAUCASUS), GEORGIAN | Country: Georgia (Caucasus) | Date: end of the 19th century | Condition: excellent | Lot information | Kinžál comes from the Caucasus region, specifically from Georgia. This is a traditional Caucasian dagger with a double-sided sharpened blade with a prominent central rib, which gives the weapon strength. The blade is decorated with delicate etched patterns. The handle is an integral part of the structure, decorated with fittings with plastic decorative elements and rivets. The scabbard is richly decorated with engraving and hammered ornaments | Dimensions | Length: 47 cm | Blade length: 31 cm | Blade width: 36 mm | Weight: 430 g***IMPORTANT NOTICE*** | SHIPPING ONLY WITHIN THE EUROPEAN UNION | Bidders are obliged to inform themselves about the condition of the lots before the auction, subsequent complaints will not be taken into account.

SPARE BAYONET FOR MANNLICHER 1895 RIFLE | AUSTRIA-HUNGARY, AUSTRO-HUNGARIAN | Country: Austria | Date: 1916 - 1918 | Marking: 149 v (blade right), IX V (blade left) | Lot information | Spare bayonet for a Mannlicher 1895 rifle, manufactured between 1916 - 1918. This interesting collector's item is marked with the signatures "149 v" on the right side of the blade and "IX V" on the left side of the blade. The bayonet includes a hook for mounting rifles to mounts. The condition of the bayonet is original, with minor traces of rust removed, and comes without the scabbard. | Dimensions | Length: 41.5 cm | Blade length: 25.5 cm | Blade width: 25 mm | Weight: 410 g***IMPORTANT NOTICE*** | SHIPPING ONLY WITHIN THE EUROPEAN UNION | Bidders are obliged to inform themselves about the condition of the lots before the auction, subsequent complaints will not be taken into account.

BAYONET MODEL 1924 B | JUGOSLAVIA, YUGOSLAV | Model pattern: 1924 B | Country: Jugoslavia | Date: 1924 - 1941 | Marking: VTZ (Cyrillic in the triangle on the right of the blade), Mod. 1924 B (Cyrillic left on blade) | Weapon Number: 4,681 | Condition: very good | Lot information | Bayonet model 1924 B, produced between 1924 and 1941, intended for Yugoslav military purposes. The blade has the signature "VTZ" in Cyrillic in a triangle on the right side, and "Mod. 1924 B" in Cyrillic on the left. This bayonet comes with a scabbard that shows signs of corrosion on the pommel and scabbard. The bayonet is in very good condition but shows minor signs of wear. | Dimensions | Length: 53.5 cm | Blade length: 38.5 cm | Blade width: 25 mm***IMPORTANT NOTICE*** | SHIPPING ONLY WITHIN THE EUROPEAN UNION | Bidders are obliged to inform themselves about the condition of the lots before the auction, subsequent complaints will not be taken into account.

SABER PATTERN 1796 | ENGLAND, ENGLISH | Model pattern: pattern 1796 | Country: England | Date: 19th century | Condition: very good | Lot information | Light Cavalry Officers' Saber M1796 Great Britain. No scabbard, loose wire on handle. | Dimensions | Length: 86.4 cm | Blade length: 75 cm | Blade width: 33.5 mm | Weight: 560 g***IMPORTANT NOTICE*** | SHIPPING ONLY WITHIN THE EUROPEAN UNION | Bidders are obliged to inform themselves about the condition of the lots before the auction, subsequent complaints will not be taken into account.

BAYONET 98/05 FOR A MAUSER RIFLE | GERMANY (DUISBURG AND MAGDEBURG), GERMAN | Model pattern: 98/05 | Country: Germany (Duisburg and Magdeburg) | Date: 1917 | Marking: Deutsche Maschinenfabrik A.G. Duisburg (blade right) h.mundlos & Co. Magdeburg (blade left) | Weapon Number: 2148 mm | Manufacturer: Deutsche Maschinenfabrik A.G. Duisburg (DEMAG), H. Mundlos & Co. Magdeburg | Condition: very good | Lot information | Bayonet 98/05, made in 1917, intended for the German Mauser rifle. This specimen was manufactured by Deutsche Maschinenfabrik A.G. Duisburg (DEMAG) and H. Mundlos & Co. Magdeburg, with the signatures placed on the blade: "Deutsche Maschinenfabrik A.G. Duisburg" on the right and "H. Mundlos & Co. Magdeburg" on the left. The bayonet is marked with the weapon number "2148". The bayonet is in good condition, with minor signs of wear, and comes with a scabbard. | Dimensions | Length: 52 cm | Blade length: 34.5 cm | Blade width: 34 mm | Weight: 540 g***IMPORTANT NOTICE*** | SHIPPING ONLY WITHIN THE EUROPEAN UNION | Bidders are obliged to inform themselves about the condition of the lots before the auction, subsequent complaints will not be taken into account.

HUNTING FANG | CENTRAL EUROPE, CENTRAL EUROPEAN | Country: Central Europe | Date: 2nd half of the 18th century | Condition: very good | Lot information | Hunting saber (Jagdplaute) from the second half of the 18th century. The blade is richly decorated with engravings of police figures and German texts, which are partially rubbed off due to wear. Handle with distinctive guard, without scabbard. | Dimensions | Length: 75.5 cm | Blade length: 57.8 cm | Blade width: 36.2 mm | Weight: 580 g***IMPORTANT NOTICE*** | SHIPPING ONLY WITHIN THE EUROPEAN UNION | Bidders are obliged to inform themselves about the condition of the lots before the auction, subsequent complaints will not be taken into account.

HUNTING FANG "F.S. JUNG" | GERMANY / AUSTRIA, GERMAN-AUSTRIAN | Country: Germany / Austria | Date: end of the 19th century | Marking: F.S. Jung | Manufacturer: F.S. Jung | Condition: excellent | Lot information | A late 19th century hunting fang with a straight single-edged blade bearing the maker's signature "F.S. Jung." The blade is equipped with a one-sided groove and an additional engraving with the motif of plant decor. The pommel of the handle is fitted with antler, which is fixed to a brass fitting. The shield is simple, with a flat basket and molded decor on the collar. It includes a binder with an antler handle, which is stored in the side pocket of the scabbard. The scabbard is not original and is made of leather with brass fittings and a decorative finial. | Dimensions | Length: 59.5 cm | Blade length: 45.5 cm | Blade width: 31.9 mm | Weight: 900 g***IMPORTANT NOTICE*** | SHIPPING ONLY WITHIN THE EUROPEAN UNION | Bidders are obliged to inform themselves about the condition of the lots before the auction, subsequent complaints will not be taken into account.

PALACHES FOR SENIOR OFFICERS OF THE FRENCH ARMY M1845/1882 "G. BARRÉ, PARIS" | FRANCE (PARIS), FRENCH | Model pattern: 1845/82 | Country: France (Paris) | Date: turn of the 19th and 20th centuries | Marking: G. Barré Fabric Paris (blade) | Manufacturer: G. Barré, Paris | Condition: excellent| Lot information |Cord for senior officers of the French army, model M1845/1882, made at the turn of the 19th and 20th centuries in Paris by the company "G. Barré, Paris". This cord is marked with the signature "G. Barré Fabric Paris" on the blade. A scabbard is included which shows signs of use with nickel plating falling off on the scabbard.| Dimensions |Length: 99.5 cm | Blade length: 82 cm | Blade width: 21.5 mm | Weight: 1,1 kg***IMPORTANT NOTICE*** | SHIPPING ONLY WITHIN THE EUROPEAN UNION | Bidders are obliged to inform themselves about the condition of the lots before the auction, subsequent complaints will not be taken into account.

SABER FOR C. TO. OFFICIALS, MODEL 1889 | AUSTRIA-HUNGARY, AUSTRO-HUNGARIAN | Model pattern: pattern 1889 | Country: Germany (Solignen) / Austria | Date: 1889 - 1918 | Marking: Hugo Weyersberg & Sohn Solingen (blade) | Manufacturer: Hugo Weyersberg & Sohn Solingen | Condition: excellent | Lot information | Saber for c. K. Clerks, produced in the second half of the 19th century. This 1889 model, made by Hugo Weyersberg & Sohn Solingen, is characterized by its elegant blade and handle details. The weapon is equipped with a scabbard, but it is non-original and made of steel. | Dimensions | Length: 90.5 cm | Blade length: 78 cm | Blade width: 22 mm | Weight: 930 g***IMPORTANT NOTICE*** | SHIPPING ONLY WITHIN THE EUROPEAN UNION | Bidders are obliged to inform themselves about the condition of the lots before the auction, subsequent complaints will not be taken into account.

HUNTING FANG OF A MEMBER OF THE IMPERIAL FORESTRY OFFICE | Country: Germany | Date: 1933 - 1945 | Marking: S F (back of blade) | Condition: excellent| Lot information |Hunting fang used in Germany in the years 1933-1945. The blade is etched and marked "S F" on the spine, the lower hilt has an eagle with a swastika. A scabbard is included. Later modificationsThe item is intended exclusively for collecting purposes only. We hereby declare that we are not members of any movement aimed at suppressing human rights and freedoms or that preaches national, racial or class hatred against another group of persons, nor do we support such movements.| Dimensions |Length: 42.5 cm | Blade length: 29.7 cm | Blade width: 24.3 mm | Weight: 520 g***IMPORTANT NOTICE*** | SHIPPING ONLY WITHIN THE EUROPEAN UNION | Bidders are obliged to inform themselves about the condition of the lots before the auction, subsequent complaints will not be taken into account.

DAGGER | CAUCASUS, CAUCASIAN | Country: Caucasus | Date: 19th century | Marking: U.A.K. (Alphabet on the upper fitting of the scabbard) | Condition: good | Lot information | A "dagger" type dagger with a carbon steel blade ground on both sides, equipped with longitudinal grooves. The blade is made by forging and polishing, with a noticeable patina and traces of corrosion. The handle is made of metal handles, decorated with engraving and plastic elements. The scabbard is covered with black leather, finished with metal fittings with engraved ornaments. The upper fitting of the scabbard bears the signature "У.А.К." written in Cyrillic alphabet, which may refer to the manufacturer or workshop. The fittings are riveted and partially decorated with filigree work | Dimensions | Length: 49.5 cm | Blade length: 33.9 cm | Blade width: 35 mm | Weight: 480 g***IMPORTANT NOTICE*** | SHIPPING ONLY WITHIN THE EUROPEAN UNION | Bidders are obliged to inform themselves about the condition of the lots before the auction, subsequent complaints will not be taken into account.

BAYONET PATTERN 24 | CZECHOSLOVAKIA, CZECHOSLOVAK | Model pattern: pattern 24 | Country: Czechoslovakia | Date: 1924 - 1939 | Marking: ČSZ C (left side of blade) 2217 ČETN (handle head) | Condition: very good | Lot information | Bodák vzor 24, produced between 1924 and 1939, intended for the Czechoslovak gendarmerie. On the left side of the blade is the signature "ČSZ C", while on the head of the handle is the marking "2217 ČETN". This bayonet comes with a scabbard that shows traces of removed corrosion which is also evident on the pommel of the grip. The bayonet is in original condition with minor signs of use. | Dimensions | Length: 37.5 cm | Blade length: 25 cm | Blade width: 22 mm | Weight: 310 g***IMPORTANT NOTICE*** | SHIPPING ONLY WITHIN THE EUROPEAN UNION | Bidders are obliged to inform themselves about the condition of the lots before the auction, subsequent complaints will not be taken into account.

SABER | CENTRAL EUROPE, CENTRAL EUROPEAN | Country: Central Europe | Date: around 1840 | Condition: excellent | Lot information | An individual saber, made around 1840, probably for a nobleman or officer. Supplied with brass scabbard. | Dimensions | Length: 91.4 cm | Blade length: 74 cm | Blade width: 25.7 mm | Weight: 970 g***IMPORTANT NOTICE*** | SHIPPING ONLY WITHIN THE EUROPEAN UNION | Bidders are obliged to inform themselves about the condition of the lots before the auction, subsequent complaints will not be taken into account.

SABER PATTERN 1904 FOR CAVALRY OFFICERS | GERMANY (SOLINGEN) / AUSTRIA, GERMAN-AUSTRIAN | Model pattern: pattern 1904 | Country: Germany (Solignen) / Austria | Date: 1904 - 1918 | Marking: Weyersberg & Co. Solingen (blade) | Manufacturer: Paul Weyersberg & Co. | Condition: very good | Lot information | This saber was manufactured between 1904 and 1918 by Paul Weyersberg & Co. In Solingen, Germany. It is a 1904 model, intended for officers of the Austro-Hungarian cavalry. The signature "Weyersberg & Co. Solingen" is stamped on the blade. The saber is equipped with a scabbard that shows signs of normal wear and use. | Dimensions | Length: 90 cm | Blade length: 74.5 cm | Blade width: 31 mm | Weight: 1,3 kg***IMPORTANT NOTICE*** | SHIPPING ONLY WITHIN THE EUROPEAN UNION | Bidders are obliged to inform themselves about the condition of the lots before the auction, subsequent complaints will not be taken into account.

TULWAR SABER | INDIA, INDIAN | Country: India | Date: 19th century | Condition: very good | Lot information | Curved blade with decorative engravings, typical of Indian sabers of the 18th-19th century. century. Solid metal handle with a disc-shaped head and a distinctive guard. The original scabbard is included. | Dimensions | Length: 81.2 cm | Blade length: 67 cm | Blade width: 39 mm | Weight: 910 g***IMPORTANT NOTICE*** | SHIPPING ONLY WITHIN THE EUROPEAN UNION | Bidders are obliged to inform themselves about the condition of the lots before the auction, subsequent complaints will not be taken into account.

SABER FOR HEAVY RIDING "KLINGENTHAL - MAISON DE LA MANUFACTURE" | FRANCE, FRENCH | Model pattern: pattern 1822 | Country: France (Klingenthal) | Date: 1882 - 1914 | Marking: Manufre Rale de Klingenthal Juillet 1824 (blade) | Weapon Number: 10425 mm | Manufacturer: Klingenthal - Maison de la Manufacture | Condition: excellent | Lot information | Model 1822 Heavy Cavalry Saber Made in France at the Klingenthal Manufactory between 1882 and 1914. The weapon is sheathed and signed on the blade with a date of July 1824. The weapon's number is 10425. The saber has a characteristic robust blade and heavily curved handle, making it suitable for heavy cavalry use. Scabbard with traces of use. | Dimensions | Length: 111 cm | Blade length: 95.5 cm | Blade width: 29 mm | Weight: 2,2 kg***IMPORTANT NOTICE*** | SHIPPING ONLY WITHIN THE EUROPEAN UNION | Bidders are obliged to inform themselves about the condition of the lots before the auction, subsequent complaints will not be taken into account.

BAYONET MODEL 1948 | JUGOSLAVIA, YUGOSLAV | Model pattern: pattern 1948 | Country: Jugoslavia | Date: after 1948 | Marking: PREDUCEČE 44 (blade right, Cyrillic) | Weapon Number: 31,591 | Condition: excellent | Lot information | Bodák vzor 1948, produced after 1948 in Yugoslavia, is a numbered specimen marked "PREDUZEČE 44" on the blade, written in Cyrillic. This bayonet is in excellent condition with the scabbard showing only minor signs of use. It is a post-war model, typical of Yugoslav military equipment | Dimensions | Length: 39.9 cm | Blade length: 24.8 cm | Blade width: 25 mm | Weight: 380 g***IMPORTANT NOTICE*** | SHIPPING ONLY WITHIN THE EUROPEAN UNION | Bidders are obliged to inform themselves about the condition of the lots before the auction, subsequent complaints will not be taken into account.

HUNTING FANG | CENTRAL EUROPE, CENTRAL EUROPEAN | Country: Central Europe | Date: around 1900 | Condition: excellent | Lot information | Straight blade with two-sided grinding and two-sided narrow groove, decorated with engravings with hunting motifs. A brass shield with a shell plate decorated with an engraving of a crown, a straight bar richly shaped in the form of oak branches. Deer antler handle decorated with brass rivets and decorative elements. The set includes a leather scabbard with brass fittings. Blade and mount with later modifications and engravings. | Dimensions | Length: 71.5 cm | Blade length: 56.2 cm | Blade width: 28.5 mm | Weight: 780 g***IMPORTANT NOTICE*** | SHIPPING ONLY WITHIN THE EUROPEAN UNION | Bidders are obliged to inform themselves about the condition of the lots before the auction, subsequent complaints will not be taken into account.

"ANTEBELLUM" UNOFFICIAL OFFICER CORD | USA, AMERICAN | Country: USA | Date: 2nd half of the 19th century | Condition: excellent | Lot information | An officer's cord from the period before the American Civil War ("Antebellum"), an unofficial model, used mainly for ceremonial purposes. The blade is straight, one-sided ground, made of steel with visible traces of age and corrosion. It has a characteristic tapering shape with a central point. The hilt is decorated with a brass pommel in the shape of an eagle's head, a common motif in American military cords of this period. The handle is grooved, made of material imitating ivory. The canopy is transverse, wide, decorated with simple floral patterns and finished with decorative elements. The scabbard is metal, painted black, with brass fittings. The foot of the scabbard is decorated with an embossed relief of a five-pointed star, which may refer to US military or state symbols. | Dimensions | Length: 88.5 cm | Blade length: 71 cm | Blade width: 17 mm | Weight: 770 g***IMPORTANT NOTICE*** | SHIPPING ONLY WITHIN THE EUROPEAN UNION | Bidders are obliged to inform themselves about the condition of the lots before the auction, subsequent complaints will not be taken into account.

OFFICER'S CORD | FRANCE, FRENCH | Country: France | Date: around 1880 | Condition: very good | Lot information | A French officer's cord from around 1880. The blade is straight, single-ground with a central point, made of steel with visible traces of corrosion. Three narrow grooves run along the entire length of the blade. The hilt is brass, equipped with a semi-arched guard with a cup-shaped hand guard, which provides increased protection during fights. The handle is made of leather, wrapped with black wire, which ensures a firm grip. The pommel is bulbous, a typical feature of French officer cords of this era. The scabbard is metal, originally nickel-plated, but the nickel layer is falling off on its surface | Dimensions | Length: 101 cm | Blade length: 81 cm | Blade width: 11.9 mm | Weight: 570 g***IMPORTANT NOTICE*** | SHIPPING ONLY WITHIN THE EUROPEAN UNION | Bidders are obliged to inform themselves about the condition of the lots before the auction, subsequent complaints will not be taken into account.

DAGGER | CAUCASUS, CAUCASIAN | Country: Caucasus | Date: beginning of the 21st century | Lot information | Double-ground blade with central rib, handle and scabbard decorated with tulle technique - etching and gilding with floral motifs. Massive handle head with rivets, metal scabbard with rich ornamentation. | Dimensions | Length: 39.5 cm | Blade length: 24.5 cm | Blade width: 30 mm***IMPORTANT NOTICE*** | SHIPPING ONLY WITHIN THE EUROPEAN UNION | Bidders are obliged to inform themselves about the condition of the lots before the auction, subsequent complaints will not be taken into account.

DAGGER | CAUCASUS, CAUCASIAN | Country: Caucasus | Date: beginning of the 21st century | Lot information | The double-ground blade with a central rib is richly decorated with the tulle technique, which uses contrasting black and light metal inlays in a floral decor. The handle is equipped with a wide head. The scabbard matches the decoration of the blade, is decorated with etched and tulle patterns, finished with a ball fitting. | Dimensions | Length: 26.4 cm | Blade length: 15.7 cm | Blade width: 22 mm***IMPORTANT NOTICE*** | SHIPPING ONLY WITHIN THE EUROPEAN UNION | Bidders are obliged to inform themselves about the condition of the lots before the auction, subsequent complaints will not be taken into account.

BAYONET MODEL 84/98 | GERMANY, GERMAN | Model pattern: 84/98 | Country: Germany | Date: 1939 - 1945 | Marking: 76 (top of blade), S/155G (sheath), 4983 b (sheath) | Condition: excellent | Lot information | Bayonet model 84/98, used during II. WWII, is a standard German Mauser rifle bayonet. The blade is marked "76" at the top, while the scabbard is marked "S/155G" and "4983 b". This bayonet comes with a scabbard that has minor signs of use. The bayonet is in very good condition | Dimensions | Length: 42.5 cm | Blade length: 24.4 cm | Blade width: 24 mm | Weight: 370 g***IMPORTANT NOTICE*** | SHIPPING ONLY WITHIN THE EUROPEAN UNION | Bidders are obliged to inform themselves about the condition of the lots before the auction, subsequent complaints will not be taken into account.

CHILDREN'S SABER | HUNGARY, HUNGARIAN | Country: Ugra | Date: 2nd half of the 18th century | Marking: Vivat hussar (double-edged blade) | Condition: very good | Lot information | A children's saber from the second half of the 18th century, complete with scabbard, belt and hanging cords. This decorative and ceremonial piece was probably intended for young noblemen or cadets, as part of an education in the spirit of military tradition.The blade is gently curved, ground on one side, engraved with the inscription "Vivat Husar", which refers to the hussar units that had an important position in Hungary. The handle is made of brass, richly decorated with a relief ornament. The scabbard is partially covered with green velvet and decorated with brass elements.It also includes the original textile suspension system, composed of braided cords and metal fasteners, which allowed the saber to be worn on the belt | Dimensions | Length: 59.8 cm | Blade length: 40.5 cm | Blade width: 19 mm | Weight: 200 g***IMPORTANT NOTICE*** | SHIPPING ONLY WITHIN THE EUROPEAN UNION | Bidders are obliged to inform themselves about the condition of the lots before the auction, subsequent complaints will not be taken into account.

EAGLE HEAD SABER | HUNGARY, HUNGARIAN | Date: 20th century | Condition: excellent | Lot information | This saber features a light metal hilt and crosspiece, with the pommel of the hilt depicting an eagle's head with an open beak. The weapon is completed with a scabbard, which bears minor traces of use. | Dimensions | Length: 88 cm | Blade length: 73.5 cm | Blade width: 23 mm | Weight: 1 kg***IMPORTANT NOTICE*** | SHIPPING ONLY WITHIN THE EUROPEAN UNION | Bidders are obliged to inform themselves about the condition of the lots before the auction, subsequent complaints will not be taken into account.

INDIAN SWORD TULWAR | INDIA, INDIAN | Country: India | Date: 19th century | Condition: excellent | Lot information | The Indian Tulwar sword, a typical saber used in India, dates back to the 19th century. The blade is significantly curved, which allows for effective slashing attacks. The Tulwar was traditionally used by warriors in various parts of India, particularly the Mughal Empire and the Maratha Confederacy.This specimen has a smooth-edged steel blade and the characteristic massive disc-headed hilt to provide a firm grip and protect the hand. The cross guard is finished with rounded projections. The sword is completed with a simple fabric scabbard. | Dimensions | Length: 92 cm | Blade length: 74.5 cm | Blade width: 34.5 mm | Weight: 810 g***IMPORTANT NOTICE*** | SHIPPING ONLY WITHIN THE EUROPEAN UNION | Bidders are obliged to inform themselves about the condition of the lots before the auction, subsequent complaints will not be taken into account.

PALASH FOR SENIOR OFFICERS MODEL 1845/1882 | FRANCE, FRENCH | Model pattern: 1845/82 | Country: France | Date: 1882 - 1918 | Marking: BF mark on the blade | Condition: excellent | Lot information | Cord of the pattern 1845/1882, used by senior officers of the French army between 1882 and 1918. The blade is straight, one-sided ground with a central point, made of polished steel. The hilt is brass with a richly decorated shield and basket with embossed floral motifs. The handle has a black surface with spiral wiring for a better grip. The head is onion-shaped with a decorative end. The scabbard is metal, chrome-plated, equipped with one suspension ring for wearing on a belt. Minor traces of wear and corrosion are visible on the surface, especially in the area of ​​the mouth and end of the scabbard. | Dimensions | Length: 99.9 cm | Blade length: 83 cm | Blade width: 22 mm | Weight: 1,1 kg***IMPORTANT NOTICE*** | SHIPPING ONLY WITHIN THE EUROPEAN UNION | Bidders are obliged to inform themselves about the condition of the lots before the auction, subsequent complaints will not be taken into account.

SABER PATTERN 1827 | AUSTRIA, AUSTRIAN | Model pattern: pattern 1827 | Country: Austria | Date: after 1827 | Condition: good | Lot information | Austrian light cavalry staff officer saber, made after 1827. It has a broad and strongly curved blade, a basket made of two rods, one of which is hinged. The wooden handle is not original. Steel scabbard with two rings. Drop-down basket. | Dimensions | Length: 102.5 cm | Blade length: 87.5 cm | Blade width: 38.5 mm | Weight: 1,4 kg***IMPORTANT NOTICE*** | SHIPPING ONLY WITHIN THE EUROPEAN UNION | Bidders are obliged to inform themselves about the condition of the lots before the auction, subsequent complaints will not be taken into account.

DAGGER "JAMBIYA" | NORTH AFRICA, NORTH AFRICAN | Country: North Africa | Date: beginning of the 21st century | Lot information | A traditional curved dagger of the Jambiya type, common in North Africa and the Arab world, where it served as a symbol of social status and at the same time as a practical weapon. The blade is curved, ground on one side, with visible traces of corrosion. The handle is massive, ending in a wide "T"-shaped head, made of a dark material (probably horn) and richly decorated with engraved decor and metal elements. The scabbard is made of metal, richly decorated with geometric and floral patterns. A braided black cord is attached to the back, which allows the dagger to be worn on the belt or over the shoulder. The tip of the vagina is elongated and bent | Dimensions | Length: 42.0 cm | Blade length: 21.0 cm | Blade width: 27 mm***IMPORTANT NOTICE*** | SHIPPING ONLY WITHIN THE EUROPEAN UNION | Bidders are obliged to inform themselves about the condition of the lots before the auction, subsequent complaints will not be taken into account.

FANG "PATTERN 1771" | FRANCE, FRENCH | Model pattern: pattern 1771 | Country: France | Date: half of the 19th century | Condition: very good | Lot information | French Artillery Fang pattern 1771, made in the mid 19th century. The blade is short, massive, with a characteristic bend at the tip. The handle is equipped with a brass cover. Preserved including scabbard. | Dimensions | Length: 61.7 cm | Blade length: 47.5 cm | Blade width: 46 mm | Weight: 1,4 kg***IMPORTANT NOTICE*** | SHIPPING ONLY WITHIN THE EUROPEAN UNION | Bidders are obliged to inform themselves about the condition of the lots before the auction, subsequent complaints will not be taken into account.

BAYONET MODEL M1965 | SWEDEN, SWEDISH | Model pattern: M1965 | Country: Sweden | Date: 2nd half of the 20th century | Weapon Number: 59,375,023 | Condition: excellent | Lot information | Bayonet M1965, made in the 2nd half of the 20th century in Sweden. This model is equipped with a scabbard and a sling. The bayonet was used in the Swedish army and is known for its durability and quality production. | Dimensions | Length: 32 cm | Blade length: 16.5 cm | Blade width: 23 mm | Weight: 470 g***IMPORTANT NOTICE*** | SHIPPING ONLY WITHIN THE EUROPEAN UNION | Bidders are obliged to inform themselves about the condition of the lots before the auction, subsequent complaints will not be taken into account.

SMALL CORD (KORDÍK) OF NON-COMMISSIONED OFFICERS OF THE GROUND FORCES OF THE ARMY, MODEL M39 | SLOVAKIA, SLOVAK | Model pattern: M39 | Country: Central Europe | Date: 19th century | Condition: excellent| Lot information |A small Slovak military cord of the M39 pattern, intended for non-commissioned officers of the ground forces of the army of the Slovak Republic. This model was introduced during the existence of the Slovak State (1939-1945) as part of the uniform equipment of non-commissioned officers. The blade is straight, ground on both sides, with a central point, made of polished steel. It has a smooth surface without decorative engravings, intended primarily for representative purposes. The hilt is metal, with black side handles, attached with two rivets. The main feature of this model is the oval head with the image of a double cross on a triple peak, which is the national symbol of the Slovak Republic. The shield is shaped into slightly curved arms with plastic decoration. The scabbard is covered in black velvet, with silver-colored metal fittings, including a ball tip finish. The hardware includes two suspension rings for carrying the cord on a belt.| Dimensions |Length: 38 cm | Blade length: 22.2 cm | Blade width: 22 mm | Weight: 430 g***IMPORTANT NOTICE*** | SHIPPING ONLY WITHIN THE EUROPEAN UNION | Bidders are obliged to inform themselves about the condition of the lots before the auction, subsequent complaints will not be taken into account.

BAYONET 1891 TS | ITALY, ITALIAN | Model pattern: 1891 TS | Country: Italy | Date: 1915 - 1918 | Marking: Brescia (ricasso blade left), MA (ricasso blade right), ME (scabbard carrier) | Condition: very good | Lot information | Italian bayonet model 1891 TS, intended for Mannlicher - Carcano carbines, manufactured in the period 1915 - 1918. The bayonet is marked with the signatures "Brescia" on the left side of the blade and "MA" on the right side of the blade. There is a marking "ME" on the foot of the scabbard. This bayonet is in original condition with visible signs of use and comes with a scabbard. | Dimensions | Length: 43.5 cm | Blade length: 30 cm | Blade width: 22 mm | Weight: 350 g***IMPORTANT NOTICE*** | SHIPPING ONLY WITHIN THE EUROPEAN UNION | Bidders are obliged to inform themselves about the condition of the lots before the auction, subsequent complaints will not be taken into account.

CORD OF AUSTRIAN RAILWAY OFFICIALS | AUSTRIA-HUNGARY, AUSTRO-HUNGARIAN | Country: Austria Hungary | Date: around 1900 | Condition: excellent | Lot information | The blade is straight, double-edged, made of steel, with two longitudinal grooves on the sides. The surface of the blade shows signs of age and oxidation. The hilt is all-brass, richly decorated. The handle is spirally shaped and ends with a spherical head. The crossbar of the canopy is straight with decoratively shaped ends. The patronage is completed by a large decorative circular element with a plastically decorated motif of a railway wheel surrounded by ornaments. The scabbard is a combination of leather and metal elements. The leather sheath of the scabbard is black, with brass fittings that bear relief ornamentation, including the typical wave motifs and a cog wheel, symbolizing the railway. The scabbard is equipped with a suspension ring for attaching to a belt. | Dimensions | Length: 84 cm | Blade length: 69.5 cm | Blade width: 17 mm | Weight: 600 g***IMPORTANT NOTICE*** | SHIPPING ONLY WITHIN THE EUROPEAN UNION | Bidders are obliged to inform themselves about the condition of the lots before the auction, subsequent complaints will not be taken into account.

CORD FOR AUSTRIAN CIVIL SERVANTS MODEL 1849 | AUSTRIA-HUNGARY, AUSTRO-HUNGARIAN | Model pattern: pattern 1849 | Country: Austria Hungary | Date: 1849 - 1916 | Marking: Viribus Unitis (Handle Sleeve), FJI (Handle Sleeve) | Condition: excellent | Lot information | Kord made for Austrian civil servants model 1849, equipped with scabbard. The upper part of the blade is decorated with fine etching. The handle sleeve is engraved with the signature "Viribus Unitis" and "FJI," referring to the imperial symbolism of the time. | Dimensions | Length: 92.5 cm | Blade length: 80 cm | Blade width: 20 mm | Weight: 670 g***IMPORTANT NOTICE*** | SHIPPING ONLY WITHIN THE EUROPEAN UNION | Bidders are obliged to inform themselves about the condition of the lots before the auction, subsequent complaints will not be taken into account.

DAGGER | EASTERN EUROPE, EASTERN EUROPEAN | Country: North Africa | Date: beginning of the 21st century | Lot information | A traditional curved dagger with a one-sided ground steel blade, ending in a sharp point. Wide profile handle with flared head, made of black material, probably horn or hardened wood, decorated with metal elements and white wrapping. The scabbard is metal, richly decorated with engraved patterns and set with three semi-precious stones or glass imitation gems in red, white and green. The surface of the scabbard is decorated in detail with fine metal wires that create a complex ornamental pattern. The tip of the scabbard is finished with a metal ornament with perforated decor. | Dimensions | Length: 37.0 cm | Blade length: 19.0 cm | Blade width: 33 mm***IMPORTANT NOTICE*** | SHIPPING ONLY WITHIN THE EUROPEAN UNION | Bidders are obliged to inform themselves about the condition of the lots before the auction, subsequent complaints will not be taken into account.

PALASH MODEL 1882 | FRANCE, FRENCH | Model pattern: pattern 1882 | Country: France | Date: 1882 - 1918 | Condition: excellent | Lot information | Flair pattern 1882 for French infantry officers. A straight, single-edged blade with a prominent spine and a double-sided cut, with a narrow groove in the upper part. Basket protection made of steel, characteristically shaped with distinctive protective arches. Handle covered with leather, complete with spirally wound wire. Steel scabbard, equipped with one movable suspension ring. | Dimensions | Length: 101 cm | Blade length: 83 cm | Blade width: 21.8 mm | Weight: 1 kg***IMPORTANT NOTICE*** | SHIPPING ONLY WITHIN THE EUROPEAN UNION | Bidders are obliged to inform themselves about the condition of the lots before the auction, subsequent complaints will not be taken into account.

HUNTING FANG | CENTRAL EUROPE, CENTRAL EUROPEAN | Country: Central Europe | Date: end of the 19th century | Condition: very good | Lot information | Hunting fang from the end of the 19th century, equipped with a scabbard. The blade is made of carbon steel, has a straight back and is equipped with saw teeth, which were intended to cut through the sternum of a hunted game. The shield is made of brass, decorated with ornaments and shaped into a shell motif. The handle is made of deer antler and is fixed with a metal sleeve. The scabbard is made of black leather with reinforced brass fittings, with the upper part having a print for attachment to the belt. | Dimensions | Length: 65.7 cm | Blade length: 49.5 cm | Blade width: 28.5 mm | Weight: 860 g***IMPORTANT NOTICE*** | SHIPPING ONLY WITHIN THE EUROPEAN UNION | Bidders are obliged to inform themselves about the condition of the lots before the auction, subsequent complaints will not be taken into account.

DIPLOMATIC CORD | FRANCE, FRENCH | Country: Germany (Solingen) | Date: 1st half of the 19th century | Marking: Solingen (rikaso blade left) | Condition: excellent | Lot information | A 19th century French mayor's representative cord, intended for ceremonial purposes. The handle is made of brass and decorated with rich relief decoration, including motifs of a soldier's head on the pommel. The crossbar is decorated with ornaments and the shield has a characteristic shell shape. The stems are made of grooved mother-of-pearl, fixed with brass fittings. The blade is decorated on one side with etched patterns, including heraldic motifs and stylized plant ornaments. The cord is complemented by a leather scabbard with brass fittings, decorated with relief elements | Dimensions | Length: 93.5 cm | Blade length: 80.2 cm | Blade width: 18 mm | Weight: 620 g***IMPORTANT NOTICE*** | SHIPPING ONLY WITHIN THE EUROPEAN UNION | Bidders are obliged to inform themselves about the condition of the lots before the auction, subsequent complaints will not be taken into account.

BAYONET MODEL M1935 | TURKEY, TURKISH | Model pattern: M1935 | Country: Turkey | Date: 1935 - 1945 | Marking: 217, SFA (handle head) | Condition: very good | Lot information | Model M1935 bayonet, produced in Turkey between 1935 and 1945. This bayonet is fitted with a scabbard that shows signs of wear. The signature "217" and "SFA" are visible on the head of the handle. The bayonet is in a condition consistent with normal use, with minor signs of wear on the scabbard. | Dimensions | Length: 40 cm | Blade length: 24.7 cm | Blade width: 24 mm | Weight: 440 g***IMPORTANT NOTICE*** | SHIPPING ONLY WITHIN THE EUROPEAN UNION | Bidders are obliged to inform themselves about the condition of the lots before the auction, subsequent complaints will not be taken into account.

SABER PATTERN 1861 | GERMANY (SOLIGNEN) / AUSTRIA, GERMAN-AUSTRIAN | Model pattern: pattern 1861 | Country: Germany (Solignen) / Austria | Date: 1861 - 1918 | Marking: Weyersberg & Stamm Solingen (blade) | Manufacturer: Weyersberg & Stamm Solingen | Condition: very good | Lot information | Saber for infantry officers model 1861, made in Solingen by Weyersberg & Stamm. Scabbard and blade with traces of falling nickel plating. With a sheath. Signature: Weyersberg & Stamm Solingen (on the blade). | Dimensions | Length: 88 cm | Blade length: 75 cm | Blade width: 28 mm | Weight: 1 kg***IMPORTANT NOTICE*** | SHIPPING ONLY WITHIN THE EUROPEAN UNION | Bidders are obliged to inform themselves about the condition of the lots before the auction, subsequent complaints will not be taken into account.

SABER MODEL 1867/93 | SWEDEN, SWEDISH | Model pattern: 1867/93 | Country: Sweden | Date: beginning of the 20th century | Marking: 2KT3 No. 335 (back of blade) | Condition: excellent | Lot information | This saber dates from the early 20th century and is made to the Swedish model 1867/93. On the back of the blade is the signature "2KT3 No. 335". The blade shows several areas of old blackened corrosion on its lower part. Scabbard is not included with this piece. The gun is in original condition, with age-appropriate patina. | Dimensions | Length: 105.5 cm | Blade length: 91 cm | Blade width: 32 mm | Weight: 1,1 kg***IMPORTANT NOTICE*** | SHIPPING ONLY WITHIN THE EUROPEAN UNION | Bidders are obliged to inform themselves about the condition of the lots before the auction, subsequent complaints will not be taken into account.

FRENCH MILITARY POLICE AND GENDARMERIE OFFICERS CORD M1853/79 | FRANCE, FRENCH | Model pattern: 1853/72 | Country: France | Date: last quarter of the 19th century | Condition: very good | Lot information | Model 1853/79 officer's cord used by the French military police and gendarmerie. The blade is straight, one-sided ground with a central point, made of steel with visible traces of corrosion and partially removed surface stains. There are three narrow grooves along the entire length of the blade, which reduce the weight of the weapon. The hilt is brass with a richly decorated handle and guard. The handle is decorated with a relief pattern with leaf motifs, ending with a distinctive bulbous head. The crossbar of the guard is curved on one side, transitioning into a simple arc-shaped basket that protects the user's hand. The scabbard is steel, with visible signs of age and corrosion. It is equipped with a pair of hanging rings for attaching to a belt | Dimensions | Length: 104 cm | Blade length: 80.2 cm | Blade width: 20 mm | Weight: 830 g***IMPORTANT NOTICE*** | SHIPPING ONLY WITHIN THE EUROPEAN UNION | Bidders are obliged to inform themselves about the condition of the lots before the auction, subsequent complaints will not be taken into account.

CHETNIK SABER PATTERN 29 | AUSTRIA-HUNGARY, AUSTRO-HUNGARIAN | Model pattern: pattern 1929 | Country: Czechoslovakia (Štos) | Date: 1920s | Marking: WLASZLOVITS ŚTÓS, 11602 ČET (blade) | Weapon Number: 11602 mm | Manufacturer: Wlaszlovits Stós | Condition: excellent | Lot information | Model 1904 Saber, intended for officers of the Austro-Hungarian Cavalry, was produced between 1904 and 1918. The weapon is equipped with a scabbard that shows signs of use. The overall condition of the saber is preserved in good condition, suitable for collectors and lovers of military history. | Dimensions | Length: 68.6 cm | Blade length: 55 cm | Blade width: 30 mm | Weight: 810 g***IMPORTANT NOTICE*** | SHIPPING ONLY WITHIN THE EUROPEAN UNION | Bidders are obliged to inform themselves about the condition of the lots before the auction, subsequent complaints will not be taken into account.

TULWAR SABER | INDIA, INDIAN | Country: India | Date: beginning of the 19th century | Marking: Illegible partially erased mark, perhaps a human face (blade) | Condition: very good | Lot information | A traditional early 19th century Tulwar with a characteristic curved blade. An illegible, partially erased mark on the blade, perhaps a human face. The scabbard is missing, the surface of the blade shows signs of age and wear. | Dimensions | Length: 89.5 cm | Blade length: 76.5 cm | Blade width: 36 mm | Weight: 1 kg***IMPORTANT NOTICE*** | SHIPPING ONLY WITHIN THE EUROPEAN UNION | Bidders are obliged to inform themselves about the condition of the lots before the auction, subsequent complaints will not be taken into account.

CUTLASS | FRANCE, FRENCH | Model pattern: pattern 1882 | Country: France | Date: 2nd half of the 19th century | Condition: excellent | Lot information | French officer's broadsword, made to pattern 1882. This broadsword features a long straight blade with a central groove. Brass basket cover made of several rods. The handle is coated with ribbed material and braided with wire for a firm grip. A metal scabbard with fastening rings for hanging on a belt is included. | Dimensions | Length: 104.5 cm | Blade length: 90 cm | Blade width: 23 mm | Weight: 1,2 kg***IMPORTANT NOTICE*** | SHIPPING ONLY WITHIN THE EUROPEAN UNION | Bidders are obliged to inform themselves about the condition of the lots before the auction, subsequent complaints will not be taken into account.

BAYONET MODEL M41 | SPAIN (TOLEDO), SPANISH | Model pattern: M41 | Country: Spain (Toledo) | Date: 1940s | Marking: FN Toledo (left on blade) | Weapon Number: 4787 U | Condition: excellent | Lot information | The bayonet model M41, made in the 1940s in Spain (Toledo), is intended for rifles produced in this area. The blade is marked "FN Toledo" and the weapon number "4787 U". This bayonet comes with a scabbard that shows minor signs of wear, which is natural for this historic piece. The bayonet is still in good condition. | Dimensions | Length: 39 cm | Blade length: 24.5 cm | Blade width: 30 mm | Weight: 510 g***IMPORTANT NOTICE*** | SHIPPING ONLY WITHIN THE EUROPEAN UNION | Bidders are obliged to inform themselves about the condition of the lots before the auction, subsequent complaints will not be taken into account.

KCB 77 ATTACK KNIFE | GERMANY, GERMAN | Model pattern: KCB 77 | Country: Germany | Date: the last quarter of the 20th century | Condition: excellent | Lot information | Attack knife model KCB 77, made in the last quarter of the 20th century. Designed as a multi-purpose bayonet for various types of rifles, including NATO standard weapons. A characteristic blade with a serrated back and the possibility of being used as a wire cutter in combination with a scabbard. Preserved in original condition, with traces of use. | Dimensions | Length: 41.6 cm | Blade length: 24.8 cm | Blade width: 30 mm | Weight: 510 g***IMPORTANT NOTICE*** | SHIPPING ONLY WITHIN THE EUROPEAN UNION | Bidders are obliged to inform themselves about the condition of the lots before the auction, subsequent complaints will not be taken into account.

SABER PATTERN 1849 | AUSTRIA, AUSTRIAN | Country: Austria | Date: 1849 - 1918 | Marking: Delael in Wien (blade) | Condition: very good | Lot information | Saber model 1849 intended for Austrian officials in Hungary. Made between 1849 and 1918. With scabbard, trophy and plant etching on blade. The sheath seam is cracked. Signature: Delael in Wien. | Dimensions | Length: 96 cm | Blade length: 79 cm | Blade width: 27.5 mm | Weight: 820 g***IMPORTANT NOTICE*** | SHIPPING ONLY WITHIN THE EUROPEAN UNION | Bidders are obliged to inform themselves about the condition of the lots before the auction, subsequent complaints will not be taken into account.

KNIGHTS OF PYTHIAS CEREMONIAL SABER | USA (COLUMBUS, OHIO), AMERICAN | Country: USA (Columbus, Ohio) | Date: turn of the 19th and 20th centuries | Marking: The m.g.lilley & Co. Columbus Ohio (ricasso blade), J.H. Radenhoop (right side of blade) | Manufacturer: M.C. Lilley & Co. | Condition: excellent | Lot information | This ceremonial saber was made at the turn of the 19th and 20th century by M. C. Lilley & Co. In the US, specifically in Columbus, Ohio. The weapon is associated with the organization Knights of Pythias (Knights of Pythias) and bears the distinctive signs of this organization. The blade is marked with signatures including "The M.C. Lilley & Co. Columbus Ohio" on one side and "J.H. Radenhoop" on the other. The scabbard is part of this saber, but the scabbard paint shows signs of wear and wear. | Dimensions | Length: 89.5 cm | Blade length: 71 cm | Blade width: 19 mm | Weight: 1,2 kg***IMPORTANT NOTICE*** | SHIPPING ONLY WITHIN THE EUROPEAN UNION | Bidders are obliged to inform themselves about the condition of the lots before the auction, subsequent complaints will not be taken into account.

NIUWEIDAO DOUBLE SWORD | CHINA, CHINESE | Country: China / Tibet | Date: 19th century | Condition: excellent | Lot information | Originating from Tibet and China, the niuweidao double sword is a traditional martial weapon that features curved, single-sharpened blades housed together in a single scabbard. This type of sword was popular with warriors and practitioners of the martial arts as it allowed both blades to be quickly drawn and simultaneously used in combat.The blades have distinct grooves and are engraved with markings, likely related to the weapon's workshop or origin. The hilts are covered in stingray skin for better grip, with brass fittings at the ends, with one sword having a rounded pommel and the other a disc-shaped tip. The scabbard is wooden, covered with stingray skin and decorated with brass mounts with engraved ornaments. | Dimensions | Length: 96.6 cm | Blade length: 66 cm | Blade width: 39.3 mm | Weight: 1,7 kg***IMPORTANT NOTICE*** | SHIPPING ONLY WITHIN THE EUROPEAN UNION | Bidders are obliged to inform themselves about the condition of the lots before the auction, subsequent complaints will not be taken into account.

HUNTING FANG | CENTRAL EUROPE, CENTRAL EUROPEAN | Country: Central Europe | Date: around 1850 | Condition: very good | Lot information | Hunting fang with a blade made of steel, ground on one side with a full spine and a central rib for increased strength. The steel crossbar is shaped in the form of stylized animal hooves and is complemented by a shell-shaped protector. The handle is made of deer antler and finished with a steel pommel. Scabbard combining black leather with metal neck and end, equipped with hanging loops for attachment to a belt. The design and style match the Central European hunting fangs used in the 19th century. | Dimensions | Length: 48 cm | Blade length: 36.3 cm | Blade width: 24 mm | Weight: 460 g***IMPORTANT NOTICE*** | SHIPPING ONLY WITHIN THE EUROPEAN UNION | Bidders are obliged to inform themselves about the condition of the lots before the auction, subsequent complaints will not be taken into account.

HUNTING FANG | CENTRAL EUROPE, CENTRAL EUROPEAN | Country: Central Europe | Date: end of the 19th century | Marking: Eagle (blade) | Condition: very good | Lot information | Hunting fang with a double-edged steel blade, equipped with a central rib and a double ground for increased strength. The crosspiece and metal fittings of the handle are made of brass, with the crosspiece decorated with relief decor and a central ornament with a wild boar motif. The handle is made of smooth bone knuckles. The scabbard is covered in black leather and finished with a brass throat and finial with embossed plant motifs. It includes a removable two-pronged fork with handles made of bone material, stored in the side pocket of the scabbard. The construction and combination of components indicate a composite origin of the weapon, corresponding to the end of the 19th century. | Dimensions | Length: 52 cm | Blade length: 35.8 cm | Blade width: 40 mm | Weight: 930 g***IMPORTANT NOTICE*** | SHIPPING ONLY WITHIN THE EUROPEAN UNION | Bidders are obliged to inform themselves about the condition of the lots before the auction, subsequent complaints will not be taken into account.

COMBINED WEAPON - HUNTING FANG WITH PERCUSSION GUN | EUROPE, EUROPEAN | Country: Europe | Date: half of the 19th century | Condition: excellent | Lot information | A combined hunting weapon combining a hunting fang and a percussion pistol. The blade is straight, single-edged, grooved on both sides, with a prominent point. Iron shield, shell-shaped, decorated with simple ribbing. Horn handle, percussion mechanism hidden inside, flip-up trigger. A gun without a scabbard. Grooved barrel bore. | Dimensions | Length: 75.9 cm | Caliber: 11 mm | Barrel: 9.4 mm | Blade length: 61 cm | Blade width: 25 mm | Weight: 660 g***IMPORTANT NOTICE*** | SHIPPING ONLY WITHIN THE EUROPEAN UNION | Bidders are obliged to inform themselves about the condition of the lots before the auction, subsequent complaints will not be taken into account.

A Japanese short sword 'Wakizashi', probably 16th century, previously attributed to Kanemasu, with signature to tang, 30cm blade with undulating hamon, later marked in ink to the plain wood hilt 'Kanemasu, Year Tenbun, circa 1530'47cm overall length including scabbardProvenance: Colonel Charles Vernon Hume (1860-1915)